You would need Thule Podium Foot Pack for Rapid Aero Bars, part # TH460R, as well as a Thule Fit Kit for Podium Style Foot Pack, # THKIT3024, to use the Thule Aero bars you have on your 2010 Hyundai Santa Fe.
These products will install onto the flush rails of your Santa Fe and allow you to run the Aero Bars that you have as cross bars. view full answer...
I have a solution for you, but there are not any suspension enhancement systems available for your 2018 Hyundai Sante Fe. Instead, I recommend looking into a weight distribution hitch which is the recommended method for leveling your vehicle and trailer. A weight distribution hitch takes the weight of the trailer off the rear axle of the vehicle and applies it more evenly throughout the entire vehicle and trailer. This results in less rear sag on the tow vehicle along with improved handling... view full answer...
Currently our etrailer Trailer Hitch Receiver # e28AR and the Curt # C34ER are the only options for your 2023 Hyundai Santa Fe Hybrid. Both these are Class III receivers which you can use a Reducer # e63YR with to allow for any 1-1/4" class I or II accessories you may have. view full answer...
We have a range of RV thermometers and weather station products shown on the linked page that provide temperature display and related information like humidity and forecasts but none of these is specifically intended for attachment to a window. For a cost-effective model that gives you both indoor and outdoor temps as well as a clock you might like the TempMinder Indoor and Outdoor Thermometer with Clock # MRI-122AG. view full answer...
There are some roof racks that do use black bars but if your 2013 Hyundai Santa Fe. If you do not have side rails then Rhino-Rack's ROC25 Roof Rack for Naked Roofs with Vortex Aero Crossbars Item # RR92SR are aluminum, black and sleek.
If you have the side rails that run front to back and want black bars then you can go with a Thule system using the following parts:
Thule SquareBars, # TH712200, or Thule black WingBars, # TH711220
Thule Rapid Podium Roof Mounted Foot Pack, # TH460R
Thule... view full answer...
Since your 2010 Hyundai Santa Fe has a factory 4-Way trailer wiring connector, it will be pretty simple to install a working 4-Way and 7-Way combination connector. We offer a kit, # ETBC7, that has this style of connector. You will need to hardwire the remaining wires that will supply power for trailer brakes, 12 volt power for trailer lighting or maintaining trailer battery charge, and reverse light signal.
We have detailed instructions, see link, that show how to connect these wires,... view full answer...
If your 2017 Hyundai Santa Fe Sport with panoramic glass roof has an otherwise normal (bare) roof with no rails or fixtures you can use the Thule WingBar Evo roof rack made of parts # TH711400, # TH710501 and # TH145059. view full answer...
We have wheel and tires in the size and rating that you need of 5.30-12 Load Range C like the part # AM30820 which is mounted on a 5 lug bolt pattern wheel or the part # AM30790 that is mounted on a 4 bolt wheel. view full answer...
I have a different option for you, but the etrailer Trailer Hitch # e98841 you were looking at is only designed to fit the sport models of the 2017 Hyundai Santa Fe.
Since your 2017 Hyundai Santa Fe is a Limited AWD model then I recommend going with the Curt # C13153 which will be a confirmed fit and is very similar in design to the # e98841 you were looking at. This hitch is a fantastic option for carrying a bike rack, cargo carrier, or ball mount to tow a trailer, and you know you are... view full answer...
If you check out the review I attached you will see the Curt cargo carrier part # C18151 being demoed on a 2014 Hyundai Santa Fe just like yours. It will sit 14 inches off the ground at the back of the carrier. And adds 38-1/2 inches to the back of the vehicle.
It would work well for you and have clearance to fold up but you would need to be careful in steep elevation changes so that it doesn't drag. view full answer...
All available floor and cargo area mats offered for your 2014 Hyundai Santa Fe Sport can be seen on the link provided. Most of these are the carpeted type, but we also offer custom-fit thermoplastic mats from Weather Tech, such as the item you referenced, part # WT40556, which is a black cargo area mat.
You can use the filters in the left-hand margin to narrow the product results to those with the characteristics you prefer. Pricing for these products is indicated on each product page. view full answer...
Suspension enhancement options for the 2017 Hyundai Santa Fe is limited but we do have the Coil SumoSprings Custom Helper Springs, # CSS-1125. These do a great job toward reduction of sag/squat while towing and hauling loads. These are also very easy to install.
Please note the linked product review video below. view full answer...
We offer several medium-duty 2-inch Class III trailer hitch receivers for your 2004 Hyundai Santa Fe. All can be seen on the link at right, and I suggest the most cost-effective of the three, part # C13505 from Curt. Many customers do their hitch installation themselves, but most local auto repair or muffler shops will do the install for a modest fee. An installation video and the written instructions are linked also, along with two helpful articles concerning hitch installation.
I suggest... view full answer...
I do have a possible solution for you, but unfortunately the 2017 and 2018 Hyundai Santa Fe models were designed in a way that does not allow for any kind of suspension enhancement or air bags. If you're looking to reduce sag while towing, I recommend using a weight distribution hitch.
In order to choose the correct weight distribution hitch you will need to know the loaded tongue weight of your trailer. This also includes the weight of anything behind the rear axle in your tow vehicle.... view full answer...
You can install the Curt hitch part # C13152 on a vehicle like your 2017 Hyundai Santa Fe without needing a jack or lift to raise the vehicle any higher. The vehicle has enough ground clearance to not require the added lift. We use a lift in our install videos as it makes it much easier to show the install process which is also the case in the install instructions link which I attached to this page. view full answer...
We carry beam trailer axles up to the 3500-lb rating and with the dimensions most commonly used on recreational trailers. Dexter idler axle kit # 35545I-EZ-89, for example, is a 3500-lb-rated EZ-Lube axle with 74-inch spring centers and an 89-inch hub face dimension. Axle diameter is 2-3/8-inches and spindle size is indeed 1-1/16-inch.
The same axle with spindles but without hubs is part # T3584F-EZ-8974.
The linked article on trailer suspensions includes a table of common axle dimensions... view full answer...
Rhino Rack offers a reasonably priced rack system for your Santa Fe Sport. The rack consists of the aluminum Vortex crossbars, part # RRVA137B-2 and the Leg Kit to attach to the side rails is part # RRSX032.
This rack is a confirmed fit for your vehicle, and is compatible with the glass roof. I checked with Rhino Rack, and found that you CAN operate the sunroof with the crossbars in place, but any accessory mounted to the rack that extends below the crossbar might interfere. The Vortex... view full answer...
The Curt hitch part # C13152 that you referenced will also fit your 2016 Hyundai Santa Fe but you will need new install hardware since it is considered one time use. For that you will need part # RHK.
For trailer wiring you would want the part # C56332. If that is what you had on your 14 then it would also fit the 16 model. view full answer...
The only suspension enhancement confirmed to fit your 2017 Hyundai Santa Fe Limited is the Coil SumoSprings Custom Helper Springs # CSS-1145R. These provide support to the coil springs on your vehicle. For air springs like the # F4155 you looked at, you may be able to use an Air Lift 1000 Universal Air Spring Kit like # AL60920.
Finding the correct kit will require taking some measurements. First, unload your vehicle to make sure it's at normal ride height. Then, measure the inside height... view full answer...
All the hitches offered for your vehicle will interfere with the spare to a small degree, but the spare tire will still fit. I spoke with my contacts at Curt Manufacturing, as well as Cequent Performance Products, who manufacture Draw-Tite brand hitches. I was told that the Draw-Tite # 75471 and the Curt # 13538 are all compatible with 2009 Hyundai Santa Fe models equipped with the spare tire.
Although the hitch will prevent the spare from dropping straight down, the solution is very simple.... view full answer...
Go To Results